FIELDS OF APPLICATION
Locomotive engine roof joints / pantograph edges.
It can also be used for caulking various types of roofs and
masonry walls, including
Fully plugging gaps in tiles caused by sagging of battens or
otherwise in case of tiled roofs
Filling minor cracks / gaps in terraced roofs or other locations.
DIRECTIONS FOR USE
1. Substrate preparation
The area to be restored must be clean, and free of dust, grease, loose particles, etc., especially at its perimeter. It must also be free of standing water. In case the damage exceeds a depth of 10 cm, it is recommended that sand and gravel should be spread and thoroughly compacted.
• Overlapping Joints in Asbestos / GI Sheets/ metal joints – Cleaning with wire brush, Then application of Tarco Plast into the overlapping joints with knife and spatula.
• Minor cracks / gaps in terraced roofs – Widen the crack in V section, Clean with a wire brush, and Apply Tarco Plast into the crack by hand or trowel.
• Gaps in Tiles – Fully plugging Gaps in tiles due to sagging of battens or any other reason.
Approx. 21 kg/m 2/cm of layer thickness .
20 kg Iron Drums Shelf -life / Storage
Upto 12 months in original unopened sealed condition.
The product can be applied under any weather conditions , except in case of rain.